Unverbindlich \u00b7 Antwort innerhalb von 12 Stunden \u00b7 Mindestmenge ab 50 St\u00fcck<\/p>\n\n\n\n
<\/span>How Laser Engraving Works on a Ferro Rod<\/strong><\/strong><\/span><\/h2>\n\n\n\nWhat the laser actually does<\/strong><\/strong><\/h5>\n\n\n\nA laser marks the surface of the handle or striker. On wood it burns the top layer slightly darker. On metal and coated surfaces it changes the surface so the mark shows lighter or darker than the material around it. There is no ink involved.<\/p>\n\n\n\n
Know this before you design anything: a laser logo is single colour. There is no colour fill. Your logo comes out as one tone against the material, so a five-colour logo becomes a one-colour mark.<\/p>\n\n\n\n
Which surfaces take a logo well<\/strong><\/strong><\/h5>\n\n\n\n| Surface | How the mark looks | Notes |<\/p>\n\n\n\n
| Wood handle | Darker, burned tone | Most popular choice; size is limited by the curve |<\/p>\n\n\n\n
| Plastic or metal (e.g. aluminium) handle | Light or dark contrast, depending on the material | Clean lines; good for small text |<\/p>\n\n\n\n
| Steel striker | Fine, subtle mark | Works for a short brand name or simple icon |<\/p>\n\n\n\n
| Kraft box or tin | Darker mark on the surface | Lets the product itself stay plain |<\/p>\n\n\n\n
If you want the full process comparison with screen printing, our article on laser engraving vs silk screen<\/a> covers it from the knife side.<\/p>\n\n\n\nWhy laser rather than printing on most handles<\/strong><\/h5>\n\n\n\nA Feuerstahl<\/a> gets handled, scraped and carried in pockets and packs. A printed logo sits on top of the surface and can wear off with use. A laser mark is part of the surface, so it is permanent and doesn’t rub off the way print can. On a tool people really use outdoors, that’s why we push laser for the handle.<\/p>\n\n\n\n![\"Wood](\"https:\/\/www.survfire.com\/wp-content\/uploads\/2026\/06\/wood-handle-laser-logo.jpg\")
<\/figure>\n\n\n\n<\/span>Where Your Logo Can Go (and How Big It Can Be)<\/strong><\/strong><\/span><\/h2>\n\n\n\nHandle, rod, striker or box<\/strong><\/strong><\/h5>\n\n\n\n\n- Handle (wooden, plastic or metal): the most visible spot and the one most buyers choose. It’s what people hold and see in photos.<\/li>\n\n\n\n
- Striker: good for a second, smaller mark, or for a brand name when the handle carries an icon.<\/li>\n\n\n\n
- Rod: we don’t engrave the rod body. It gets scraped down with every strike, so a logo there would simply be scraped off. The logo goes on the handle (wooden, plastic or metal) or on the striker instead.<\/li>\n\n\n\n
- Box or pouch: useful when you want a clean product, or when your logo relies on colour.<\/li>\n<\/ul>\n\n\n\n
Engraving the handle and leaving the striker blank is fine too. That’s a common way to start.<\/p>\n\n\n\n
If you are building a full private label line rather than adding a logo to one item, our private label<\/a> page explains how we handle the whole programme, and the custom ferro rods OEM and private label guide<\/a> covers the wider options.<\/p>\n\n\n\nSize limits on curved wooden handles<\/strong><\/h5>\n\n\n\nWooden handles are round or oval. A laser works best on a surface that stays at the same distance from the lens, so on a curved handle the usable area is a band across the flattest part. So the curve limits how wide your logo can be. Go too wide and it gets scaled down, or the edges go soft. A compact or stacked version of your logo usually engraves better than a long horizontal one.<\/p>\n\n\n\n![\"Custom](\"https:\/\/www.survfire.com\/wp-content\/uploads\/2026\/08\/BFR-1-1024x768.jpg\")
<\/figure>\n\n\n\nOne logo or two?<\/strong><\/strong><\/h5>\n\n\n\nOne engraved spot (usually the handle) is the simplest setup. Adding a second spot, such as the striker, means a second setup and more handling per piece. We cover how that affects the price below.<\/p>\n\n\n\n
<\/span>What We Need From You: Logo Files and Mockups<\/strong><\/strong><\/span><\/h2>\n\n\n\nFile types that engrave cleanly<\/strong><\/strong><\/h5>\n\n\n\nSend your logo as an AI file, a PDF vector file, or a high-resolution JPG. Vector files (AI or PDF) give the cleanest edges because the laser follows the lines directly. A high-res JPG works too, as long as it’s sharp and high contrast.<\/p>\n\n\n\n
Black on white is ideal. Colour and gradient files are fine to send, but remember the laser is single colour, so we convert them to one tone. Very thin lines and tiny text can fill in or break up, especially on wood.<\/p>\n\n\n\n
The mockup step<\/strong><\/h5>\n\n\n\nBefore anything gets engraved, we make a mockup showing your logo on the product at the planned size and position. You approve it, or ask for changes. Nothing goes to production until you’re happy with it.<\/p>\n\n\n\n![\"Custom](\"https:\/\/www.survfire.com\/wp-content\/uploads\/2026\/10\/\u56fe\u72471-1024x427.png\")
<\/figure>\n\n\n\nMockup vs a real engraved sample<\/strong><\/h5>\n\n\n\nA mockup shows placement and proportion. It can’t show exactly how the burn looks on a particular piece of wood. If the exact look matters to you, ask about a physical sample before the bulk order. More on samples in the next section.<\/p>\n\n\n\n
Send us your logo and target quantity, and we’ll make a mockup and quote.<\/p>\n\n\n\n
Ben\u00f6tigen Sie Hilfe bei der passenden Feuerstahl-Ausf\u00fchrung f\u00fcr Ihren Markt? Fordern Sie ein individuelles Angebot nach Menge, Gr\u00f6\u00dfe und Verpackungsbedarf an.<\/p>\n\n\n\n
Individuelles Angebot anfordern \u2192<\/span><\/span><\/span><\/a><\/div>\n\n\n\n\u2713 Free samples available \u2713 Custom logo & packaging \u2713 ISO-certified factory<\/p>\n\n\n\n
<\/span>MOQ, Samples and Timing for Custom Logo Orders<\/strong><\/strong><\/span><\/h2>\n\n\n\nThe minimum for a laser logo<\/strong><\/strong><\/h5>\n\n\n\nCustom laser logos start from 50 pcs. This is the minimum for adding a laser logo only. It is not the product MOQ: ferro rod and kit quantities are quoted separately, depending on the model you choose.<\/p>\n\n\n\n
Custom printed paper boxes start from 500 pcs.<\/p>\n\n\n\n
Samples<\/strong><\/strong><\/h5>\n\n\n\nIf you want to check the rod itself before ordering, a plain sample is the way to do it. A plain single ferro rod or wood-handle ferro rod sample can be free. Kit samples (with tinder, box and so on) are not free, and custom box sampling is charged. You always pay the shipping.<\/p>\n\n\n\n
Samples with your logo engraved are not free. If you need one, tell us and we’ll include it in the quote.<\/p>\n\n\n\n
Samples ship within 7 days. Transit time is additional.<\/p>\n\n\n\n
To ask for one, use our sample request<\/a> an.<\/p>\n\n\n\nProduction time<\/strong><\/strong><\/h5>\n\n\n\nFor orders within 500 pcs, production takes 7\u201310 days after the logo is approved. For larger orders, we confirm the schedule with your quote.<\/p>\n\n\n\n
<\/span>What Changes the Price of a Custom Logo Ferro Rod<\/strong><\/strong><\/span><\/h2>\n\n\n\nWe don’t publish one price for logo rods. The quote depends on the choices below, and here’s which way each one pushes it.<\/p>\n\n\n\n
Number of engraved spots<\/strong><\/strong><\/h5>\n\n\n\nOne spot is the baseline. A second spot on the striker or the other side of the handle adds setup and handling time per piece, so it adds to the cost.<\/p>\n\n\n\n
Handle and striker choice<\/strong><\/strong><\/h5>\n\n\n\nWood handles, plastic or metal handles and different striker styles all have their own base cost. An engraved striker costs more than a plain one, simply because it goes through the laser too.<\/p>\n\n\n\n
Rod size<\/strong><\/strong><\/h5>\n\n\n\nThicker rods use more material and last longer. An 8 mm ferro rod gives around 6,000 strikes, and larger diameters cost more per piece. See our Feuerst\u00e4hle im Gro\u00dfhandel<\/a> page for the sizes we stock.<\/p>\n\n\n\nVerpackung<\/strong><\/strong><\/h5>\n\n\n\n
A laser marks the surface of the handle or striker. On wood it burns the top layer slightly darker. On metal and coated surfaces it changes the surface so the mark shows lighter or darker than the material around it. There is no ink involved.<\/p>\n\n\n\n
Know this before you design anything: a laser logo is single colour. There is no colour fill. Your logo comes out as one tone against the material, so a five-colour logo becomes a one-colour mark.<\/p>\n\n\n\n
Which surfaces take a logo well<\/strong><\/strong><\/h5>\n\n\n\n| Surface | How the mark looks | Notes |<\/p>\n\n\n\n
| Wood handle | Darker, burned tone | Most popular choice; size is limited by the curve |<\/p>\n\n\n\n
| Plastic or metal (e.g. aluminium) handle | Light or dark contrast, depending on the material | Clean lines; good for small text |<\/p>\n\n\n\n
| Steel striker | Fine, subtle mark | Works for a short brand name or simple icon |<\/p>\n\n\n\n
| Kraft box or tin | Darker mark on the surface | Lets the product itself stay plain |<\/p>\n\n\n\n
If you want the full process comparison with screen printing, our article on laser engraving vs silk screen<\/a> covers it from the knife side.<\/p>\n\n\n\nWhy laser rather than printing on most handles<\/strong><\/h5>\n\n\n\nA Feuerstahl<\/a> gets handled, scraped and carried in pockets and packs. A printed logo sits on top of the surface and can wear off with use. A laser mark is part of the surface, so it is permanent and doesn’t rub off the way print can. On a tool people really use outdoors, that’s why we push laser for the handle.<\/p>\n\n\n\n<\/figure>\n\n\n\n<\/span>Where Your Logo Can Go (and How Big It Can Be)<\/strong><\/strong><\/span><\/h2>\n\n\n\nHandle, rod, striker or box<\/strong><\/strong><\/h5>\n\n\n\n\n- Handle (wooden, plastic or metal): the most visible spot and the one most buyers choose. It’s what people hold and see in photos.<\/li>\n\n\n\n
- Striker: good for a second, smaller mark, or for a brand name when the handle carries an icon.<\/li>\n\n\n\n
- Rod: we don’t engrave the rod body. It gets scraped down with every strike, so a logo there would simply be scraped off. The logo goes on the handle (wooden, plastic or metal) or on the striker instead.<\/li>\n\n\n\n
- Box or pouch: useful when you want a clean product, or when your logo relies on colour.<\/li>\n<\/ul>\n\n\n\n
Engraving the handle and leaving the striker blank is fine too. That’s a common way to start.<\/p>\n\n\n\n
If you are building a full private label line rather than adding a logo to one item, our private label<\/a> page explains how we handle the whole programme, and the custom ferro rods OEM and private label guide<\/a> covers the wider options.<\/p>\n\n\n\nSize limits on curved wooden handles<\/strong><\/h5>\n\n\n\nWooden handles are round or oval. A laser works best on a surface that stays at the same distance from the lens, so on a curved handle the usable area is a band across the flattest part. So the curve limits how wide your logo can be. Go too wide and it gets scaled down, or the edges go soft. A compact or stacked version of your logo usually engraves better than a long horizontal one.<\/p>\n\n\n\n<\/figure>\n\n\n\nOne logo or two?<\/strong><\/strong><\/h5>\n\n\n\nOne engraved spot (usually the handle) is the simplest setup. Adding a second spot, such as the striker, means a second setup and more handling per piece. We cover how that affects the price below.<\/p>\n\n\n\n
<\/span>What We Need From You: Logo Files and Mockups<\/strong><\/strong><\/span><\/h2>\n\n\n\nFile types that engrave cleanly<\/strong><\/strong><\/h5>\n\n\n\nSend your logo as an AI file, a PDF vector file, or a high-resolution JPG. Vector files (AI or PDF) give the cleanest edges because the laser follows the lines directly. A high-res JPG works too, as long as it’s sharp and high contrast.<\/p>\n\n\n\n
Black on white is ideal. Colour and gradient files are fine to send, but remember the laser is single colour, so we convert them to one tone. Very thin lines and tiny text can fill in or break up, especially on wood.<\/p>\n\n\n\n
The mockup step<\/strong><\/h5>\n\n\n\nBefore anything gets engraved, we make a mockup showing your logo on the product at the planned size and position. You approve it, or ask for changes. Nothing goes to production until you’re happy with it.<\/p>\n\n\n\n<\/figure>\n\n\n\nMockup vs a real engraved sample<\/strong><\/h5>\n\n\n\nA mockup shows placement and proportion. It can’t show exactly how the burn looks on a particular piece of wood. If the exact look matters to you, ask about a physical sample before the bulk order. More on samples in the next section.<\/p>\n\n\n\n
Send us your logo and target quantity, and we’ll make a mockup and quote.<\/p>\n\n\n\n
Ben\u00f6tigen Sie Hilfe bei der passenden Feuerstahl-Ausf\u00fchrung f\u00fcr Ihren Markt? Fordern Sie ein individuelles Angebot nach Menge, Gr\u00f6\u00dfe und Verpackungsbedarf an.<\/p>\n\n\n\n
Individuelles Angebot anfordern \u2192<\/span><\/span><\/span><\/a><\/div>\n\n\n\n\u2713 Free samples available \u2713 Custom logo & packaging \u2713 ISO-certified factory<\/p>\n\n\n\n
<\/span>MOQ, Samples and Timing for Custom Logo Orders<\/strong><\/strong><\/span><\/h2>\n\n\n\nThe minimum for a laser logo<\/strong><\/strong><\/h5>\n\n\n\nCustom laser logos start from 50 pcs. This is the minimum for adding a laser logo only. It is not the product MOQ: ferro rod and kit quantities are quoted separately, depending on the model you choose.<\/p>\n\n\n\n
Custom printed paper boxes start from 500 pcs.<\/p>\n\n\n\n
Samples<\/strong><\/strong><\/h5>\n\n\n\nIf you want to check the rod itself before ordering, a plain sample is the way to do it. A plain single ferro rod or wood-handle ferro rod sample can be free. Kit samples (with tinder, box and so on) are not free, and custom box sampling is charged. You always pay the shipping.<\/p>\n\n\n\n
Samples with your logo engraved are not free. If you need one, tell us and we’ll include it in the quote.<\/p>\n\n\n\n
Samples ship within 7 days. Transit time is additional.<\/p>\n\n\n\n
To ask for one, use our sample request<\/a> an.<\/p>\n\n\n\nProduction time<\/strong><\/strong><\/h5>\n\n\n\nFor orders within 500 pcs, production takes 7\u201310 days after the logo is approved. For larger orders, we confirm the schedule with your quote.<\/p>\n\n\n\n
<\/span>What Changes the Price of a Custom Logo Ferro Rod<\/strong><\/strong><\/span><\/h2>\n\n\n\nWe don’t publish one price for logo rods. The quote depends on the choices below, and here’s which way each one pushes it.<\/p>\n\n\n\n
Number of engraved spots<\/strong><\/strong><\/h5>\n\n\n\nOne spot is the baseline. A second spot on the striker or the other side of the handle adds setup and handling time per piece, so it adds to the cost.<\/p>\n\n\n\n
Handle and striker choice<\/strong><\/strong><\/h5>\n\n\n\nWood handles, plastic or metal handles and different striker styles all have their own base cost. An engraved striker costs more than a plain one, simply because it goes through the laser too.<\/p>\n\n\n\n
Rod size<\/strong><\/strong><\/h5>\n\n\n\nThicker rods use more material and last longer. An 8 mm ferro rod gives around 6,000 strikes, and larger diameters cost more per piece. See our Feuerst\u00e4hle im Gro\u00dfhandel<\/a> page for the sizes we stock.<\/p>\n\n\n\nVerpackung<\/strong><\/strong><\/h5>\n\n\n\n
Why laser rather than printing on most handles<\/strong><\/h5>\n\n\n\nA Feuerstahl<\/a> gets handled, scraped and carried in pockets and packs. A printed logo sits on top of the surface and can wear off with use. A laser mark is part of the surface, so it is permanent and doesn’t rub off the way print can. On a tool people really use outdoors, that’s why we push laser for the handle.<\/p>\n\n\n\n<\/figure>\n\n\n\n<\/span>Where Your Logo Can Go (and How Big It Can Be)<\/strong><\/strong><\/span><\/h2>\n\n\n\nHandle, rod, striker or box<\/strong><\/strong><\/h5>\n\n\n\n\n- Handle (wooden, plastic or metal): the most visible spot and the one most buyers choose. It’s what people hold and see in photos.<\/li>\n\n\n\n
- Striker: good for a second, smaller mark, or for a brand name when the handle carries an icon.<\/li>\n\n\n\n
- Rod: we don’t engrave the rod body. It gets scraped down with every strike, so a logo there would simply be scraped off. The logo goes on the handle (wooden, plastic or metal) or on the striker instead.<\/li>\n\n\n\n
- Box or pouch: useful when you want a clean product, or when your logo relies on colour.<\/li>\n<\/ul>\n\n\n\n
Engraving the handle and leaving the striker blank is fine too. That’s a common way to start.<\/p>\n\n\n\n
If you are building a full private label line rather than adding a logo to one item, our private label<\/a> page explains how we handle the whole programme, and the custom ferro rods OEM and private label guide<\/a> covers the wider options.<\/p>\n\n\n\nSize limits on curved wooden handles<\/strong><\/h5>\n\n\n\nWooden handles are round or oval. A laser works best on a surface that stays at the same distance from the lens, so on a curved handle the usable area is a band across the flattest part. So the curve limits how wide your logo can be. Go too wide and it gets scaled down, or the edges go soft. A compact or stacked version of your logo usually engraves better than a long horizontal one.<\/p>\n\n\n\n<\/figure>\n\n\n\nOne logo or two?<\/strong><\/strong><\/h5>\n\n\n\nOne engraved spot (usually the handle) is the simplest setup. Adding a second spot, such as the striker, means a second setup and more handling per piece. We cover how that affects the price below.<\/p>\n\n\n\n
<\/span>What We Need From You: Logo Files and Mockups<\/strong><\/strong><\/span><\/h2>\n\n\n\nFile types that engrave cleanly<\/strong><\/strong><\/h5>\n\n\n\nSend your logo as an AI file, a PDF vector file, or a high-resolution JPG. Vector files (AI or PDF) give the cleanest edges because the laser follows the lines directly. A high-res JPG works too, as long as it’s sharp and high contrast.<\/p>\n\n\n\n
Black on white is ideal. Colour and gradient files are fine to send, but remember the laser is single colour, so we convert them to one tone. Very thin lines and tiny text can fill in or break up, especially on wood.<\/p>\n\n\n\n
The mockup step<\/strong><\/h5>\n\n\n\nBefore anything gets engraved, we make a mockup showing your logo on the product at the planned size and position. You approve it, or ask for changes. Nothing goes to production until you’re happy with it.<\/p>\n\n\n\n<\/figure>\n\n\n\nMockup vs a real engraved sample<\/strong><\/h5>\n\n\n\nA mockup shows placement and proportion. It can’t show exactly how the burn looks on a particular piece of wood. If the exact look matters to you, ask about a physical sample before the bulk order. More on samples in the next section.<\/p>\n\n\n\n
Send us your logo and target quantity, and we’ll make a mockup and quote.<\/p>\n\n\n\n
Ben\u00f6tigen Sie Hilfe bei der passenden Feuerstahl-Ausf\u00fchrung f\u00fcr Ihren Markt? Fordern Sie ein individuelles Angebot nach Menge, Gr\u00f6\u00dfe und Verpackungsbedarf an.<\/p>\n\n\n\n
Individuelles Angebot anfordern \u2192<\/span><\/span><\/span><\/a><\/div>\n\n\n\n\u2713 Free samples available \u2713 Custom logo & packaging \u2713 ISO-certified factory<\/p>\n\n\n\n
<\/span>MOQ, Samples and Timing for Custom Logo Orders<\/strong><\/strong><\/span><\/h2>\n\n\n\nThe minimum for a laser logo<\/strong><\/strong><\/h5>\n\n\n\nCustom laser logos start from 50 pcs. This is the minimum for adding a laser logo only. It is not the product MOQ: ferro rod and kit quantities are quoted separately, depending on the model you choose.<\/p>\n\n\n\n
Custom printed paper boxes start from 500 pcs.<\/p>\n\n\n\n
Samples<\/strong><\/strong><\/h5>\n\n\n\nIf you want to check the rod itself before ordering, a plain sample is the way to do it. A plain single ferro rod or wood-handle ferro rod sample can be free. Kit samples (with tinder, box and so on) are not free, and custom box sampling is charged. You always pay the shipping.<\/p>\n\n\n\n
Samples with your logo engraved are not free. If you need one, tell us and we’ll include it in the quote.<\/p>\n\n\n\n
Samples ship within 7 days. Transit time is additional.<\/p>\n\n\n\n
To ask for one, use our sample request<\/a> an.<\/p>\n\n\n\nProduction time<\/strong><\/strong><\/h5>\n\n\n\nFor orders within 500 pcs, production takes 7\u201310 days after the logo is approved. For larger orders, we confirm the schedule with your quote.<\/p>\n\n\n\n
<\/span>What Changes the Price of a Custom Logo Ferro Rod<\/strong><\/strong><\/span><\/h2>\n\n\n\nWe don’t publish one price for logo rods. The quote depends on the choices below, and here’s which way each one pushes it.<\/p>\n\n\n\n
Number of engraved spots<\/strong><\/strong><\/h5>\n\n\n\nOne spot is the baseline. A second spot on the striker or the other side of the handle adds setup and handling time per piece, so it adds to the cost.<\/p>\n\n\n\n
Handle and striker choice<\/strong><\/strong><\/h5>\n\n\n\nWood handles, plastic or metal handles and different striker styles all have their own base cost. An engraved striker costs more than a plain one, simply because it goes through the laser too.<\/p>\n\n\n\n
Rod size<\/strong><\/strong><\/h5>\n\n\n\nThicker rods use more material and last longer. An 8 mm ferro rod gives around 6,000 strikes, and larger diameters cost more per piece. See our Feuerst\u00e4hle im Gro\u00dfhandel<\/a> page for the sizes we stock.<\/p>\n\n\n\nVerpackung<\/strong><\/strong><\/h5>\n\n\n\n
<\/figure>\n\n\n\n<\/span>Where Your Logo Can Go (and How Big It Can Be)<\/strong><\/strong><\/span><\/h2>\n\n\n\nHandle, rod, striker or box<\/strong><\/strong><\/h5>\n\n\n\n\n- Handle (wooden, plastic or metal): the most visible spot and the one most buyers choose. It’s what people hold and see in photos.<\/li>\n\n\n\n
- Striker: good for a second, smaller mark, or for a brand name when the handle carries an icon.<\/li>\n\n\n\n
- Rod: we don’t engrave the rod body. It gets scraped down with every strike, so a logo there would simply be scraped off. The logo goes on the handle (wooden, plastic or metal) or on the striker instead.<\/li>\n\n\n\n
- Box or pouch: useful when you want a clean product, or when your logo relies on colour.<\/li>\n<\/ul>\n\n\n\n
Engraving the handle and leaving the striker blank is fine too. That’s a common way to start.<\/p>\n\n\n\n
If you are building a full private label line rather than adding a logo to one item, our private label<\/a> page explains how we handle the whole programme, and the custom ferro rods OEM and private label guide<\/a> covers the wider options.<\/p>\n\n\n\nSize limits on curved wooden handles<\/strong><\/h5>\n\n\n\nWooden handles are round or oval. A laser works best on a surface that stays at the same distance from the lens, so on a curved handle the usable area is a band across the flattest part. So the curve limits how wide your logo can be. Go too wide and it gets scaled down, or the edges go soft. A compact or stacked version of your logo usually engraves better than a long horizontal one.<\/p>\n\n\n\n<\/figure>\n\n\n\nOne logo or two?<\/strong><\/strong><\/h5>\n\n\n\nOne engraved spot (usually the handle) is the simplest setup. Adding a second spot, such as the striker, means a second setup and more handling per piece. We cover how that affects the price below.<\/p>\n\n\n\n
<\/span>What We Need From You: Logo Files and Mockups<\/strong><\/strong><\/span><\/h2>\n\n\n\nFile types that engrave cleanly<\/strong><\/strong><\/h5>\n\n\n\nSend your logo as an AI file, a PDF vector file, or a high-resolution JPG. Vector files (AI or PDF) give the cleanest edges because the laser follows the lines directly. A high-res JPG works too, as long as it’s sharp and high contrast.<\/p>\n\n\n\n
Black on white is ideal. Colour and gradient files are fine to send, but remember the laser is single colour, so we convert them to one tone. Very thin lines and tiny text can fill in or break up, especially on wood.<\/p>\n\n\n\n
The mockup step<\/strong><\/h5>\n\n\n\nBefore anything gets engraved, we make a mockup showing your logo on the product at the planned size and position. You approve it, or ask for changes. Nothing goes to production until you’re happy with it.<\/p>\n\n\n\n<\/figure>\n\n\n\nMockup vs a real engraved sample<\/strong><\/h5>\n\n\n\nA mockup shows placement and proportion. It can’t show exactly how the burn looks on a particular piece of wood. If the exact look matters to you, ask about a physical sample before the bulk order. More on samples in the next section.<\/p>\n\n\n\n
Send us your logo and target quantity, and we’ll make a mockup and quote.<\/p>\n\n\n\n
Ben\u00f6tigen Sie Hilfe bei der passenden Feuerstahl-Ausf\u00fchrung f\u00fcr Ihren Markt? Fordern Sie ein individuelles Angebot nach Menge, Gr\u00f6\u00dfe und Verpackungsbedarf an.<\/p>\n\n\n\n
Individuelles Angebot anfordern \u2192<\/span><\/span><\/span><\/a><\/div>\n\n\n\n\u2713 Free samples available \u2713 Custom logo & packaging \u2713 ISO-certified factory<\/p>\n\n\n\n
<\/span>MOQ, Samples and Timing for Custom Logo Orders<\/strong><\/strong><\/span><\/h2>\n\n\n\nThe minimum for a laser logo<\/strong><\/strong><\/h5>\n\n\n\nCustom laser logos start from 50 pcs. This is the minimum for adding a laser logo only. It is not the product MOQ: ferro rod and kit quantities are quoted separately, depending on the model you choose.<\/p>\n\n\n\n
Custom printed paper boxes start from 500 pcs.<\/p>\n\n\n\n
Samples<\/strong><\/strong><\/h5>\n\n\n\nIf you want to check the rod itself before ordering, a plain sample is the way to do it. A plain single ferro rod or wood-handle ferro rod sample can be free. Kit samples (with tinder, box and so on) are not free, and custom box sampling is charged. You always pay the shipping.<\/p>\n\n\n\n
Samples with your logo engraved are not free. If you need one, tell us and we’ll include it in the quote.<\/p>\n\n\n\n
Samples ship within 7 days. Transit time is additional.<\/p>\n\n\n\n
To ask for one, use our sample request<\/a> an.<\/p>\n\n\n\nProduction time<\/strong><\/strong><\/h5>\n\n\n\nFor orders within 500 pcs, production takes 7\u201310 days after the logo is approved. For larger orders, we confirm the schedule with your quote.<\/p>\n\n\n\n
<\/span>What Changes the Price of a Custom Logo Ferro Rod<\/strong><\/strong><\/span><\/h2>\n\n\n\nWe don’t publish one price for logo rods. The quote depends on the choices below, and here’s which way each one pushes it.<\/p>\n\n\n\n
Number of engraved spots<\/strong><\/strong><\/h5>\n\n\n\nOne spot is the baseline. A second spot on the striker or the other side of the handle adds setup and handling time per piece, so it adds to the cost.<\/p>\n\n\n\n
Handle and striker choice<\/strong><\/strong><\/h5>\n\n\n\nWood handles, plastic or metal handles and different striker styles all have their own base cost. An engraved striker costs more than a plain one, simply because it goes through the laser too.<\/p>\n\n\n\n
Rod size<\/strong><\/strong><\/h5>\n\n\n\nThicker rods use more material and last longer. An 8 mm ferro rod gives around 6,000 strikes, and larger diameters cost more per piece. See our Feuerst\u00e4hle im Gro\u00dfhandel<\/a> page for the sizes we stock.<\/p>\n\n\n\nVerpackung<\/strong><\/strong><\/h5>\n\n\n\n
- \n
- Handle (wooden, plastic or metal): the most visible spot and the one most buyers choose. It’s what people hold and see in photos.<\/li>\n\n\n\n
- Striker: good for a second, smaller mark, or for a brand name when the handle carries an icon.<\/li>\n\n\n\n
- Rod: we don’t engrave the rod body. It gets scraped down with every strike, so a logo there would simply be scraped off. The logo goes on the handle (wooden, plastic or metal) or on the striker instead.<\/li>\n\n\n\n
- Box or pouch: useful when you want a clean product, or when your logo relies on colour.<\/li>\n<\/ul>\n\n\n\n
Engraving the handle and leaving the striker blank is fine too. That’s a common way to start.<\/p>\n\n\n\n
If you are building a full private label line rather than adding a logo to one item, our private label<\/a> page explains how we handle the whole programme, and the custom ferro rods OEM and private label guide<\/a> covers the wider options.<\/p>\n\n\n\n
Size limits on curved wooden handles<\/strong><\/h5>\n\n\n\n
Wooden handles are round or oval. A laser works best on a surface that stays at the same distance from the lens, so on a curved handle the usable area is a band across the flattest part. So the curve limits how wide your logo can be. Go too wide and it gets scaled down, or the edges go soft. A compact or stacked version of your logo usually engraves better than a long horizontal one.<\/p>\n\n\n\n
<\/figure>\n\n\n\nOne logo or two?<\/strong><\/strong><\/h5>\n\n\n\n
One engraved spot (usually the handle) is the simplest setup. Adding a second spot, such as the striker, means a second setup and more handling per piece. We cover how that affects the price below.<\/p>\n\n\n\n
<\/span>What We Need From You: Logo Files and Mockups<\/strong><\/strong><\/span><\/h2>\n\n\n\n
File types that engrave cleanly<\/strong><\/strong><\/h5>\n\n\n\n
Send your logo as an AI file, a PDF vector file, or a high-resolution JPG. Vector files (AI or PDF) give the cleanest edges because the laser follows the lines directly. A high-res JPG works too, as long as it’s sharp and high contrast.<\/p>\n\n\n\n
Black on white is ideal. Colour and gradient files are fine to send, but remember the laser is single colour, so we convert them to one tone. Very thin lines and tiny text can fill in or break up, especially on wood.<\/p>\n\n\n\n
The mockup step<\/strong><\/h5>\n\n\n\n
Before anything gets engraved, we make a mockup showing your logo on the product at the planned size and position. You approve it, or ask for changes. Nothing goes to production until you’re happy with it.<\/p>\n\n\n\n
<\/figure>\n\n\n\nMockup vs a real engraved sample<\/strong><\/h5>\n\n\n\n
A mockup shows placement and proportion. It can’t show exactly how the burn looks on a particular piece of wood. If the exact look matters to you, ask about a physical sample before the bulk order. More on samples in the next section.<\/p>\n\n\n\n
Send us your logo and target quantity, and we’ll make a mockup and quote.<\/p>\n\n\n\n
Ben\u00f6tigen Sie Hilfe bei der passenden Feuerstahl-Ausf\u00fchrung f\u00fcr Ihren Markt? Fordern Sie ein individuelles Angebot nach Menge, Gr\u00f6\u00dfe und Verpackungsbedarf an.<\/p>\n\n\n\n
Individuelles Angebot anfordern \u2192<\/span><\/span><\/span><\/a><\/div>\n\n\n\n\u2713 Free samples available \u2713 Custom logo & packaging \u2713 ISO-certified factory<\/p>\n\n\n\n
<\/span>MOQ, Samples and Timing for Custom Logo Orders<\/strong><\/strong><\/span><\/h2>\n\n\n\n
The minimum for a laser logo<\/strong><\/strong><\/h5>\n\n\n\n
Custom laser logos start from 50 pcs. This is the minimum for adding a laser logo only. It is not the product MOQ: ferro rod and kit quantities are quoted separately, depending on the model you choose.<\/p>\n\n\n\n
Custom printed paper boxes start from 500 pcs.<\/p>\n\n\n\n
Samples<\/strong><\/strong><\/h5>\n\n\n\n
If you want to check the rod itself before ordering, a plain sample is the way to do it. A plain single ferro rod or wood-handle ferro rod sample can be free. Kit samples (with tinder, box and so on) are not free, and custom box sampling is charged. You always pay the shipping.<\/p>\n\n\n\n
Samples with your logo engraved are not free. If you need one, tell us and we’ll include it in the quote.<\/p>\n\n\n\n
Samples ship within 7 days. Transit time is additional.<\/p>\n\n\n\n
To ask for one, use our sample request<\/a> an.<\/p>\n\n\n\n
Production time<\/strong><\/strong><\/h5>\n\n\n\n
For orders within 500 pcs, production takes 7\u201310 days after the logo is approved. For larger orders, we confirm the schedule with your quote.<\/p>\n\n\n\n
<\/span>What Changes the Price of a Custom Logo Ferro Rod<\/strong><\/strong><\/span><\/h2>\n\n\n\n
We don’t publish one price for logo rods. The quote depends on the choices below, and here’s which way each one pushes it.<\/p>\n\n\n\n
Number of engraved spots<\/strong><\/strong><\/h5>\n\n\n\n
One spot is the baseline. A second spot on the striker or the other side of the handle adds setup and handling time per piece, so it adds to the cost.<\/p>\n\n\n\n
Handle and striker choice<\/strong><\/strong><\/h5>\n\n\n\n
Wood handles, plastic or metal handles and different striker styles all have their own base cost. An engraved striker costs more than a plain one, simply because it goes through the laser too.<\/p>\n\n\n\n
Rod size<\/strong><\/strong><\/h5>\n\n\n\n
Thicker rods use more material and last longer. An 8 mm ferro rod gives around 6,000 strikes, and larger diameters cost more per piece. See our Feuerst\u00e4hle im Gro\u00dfhandel<\/a> page for the sizes we stock.<\/p>\n\n\n\n
Verpackung<\/strong><\/strong><\/h5>\n\n\n\n
![\"Ferro](\"https:\/\/www.survfire.com\/wp-content\/uploads\/2026\/05\/packaging-for-ferro-rod-2-1024x576.png\")
<\/figure>\n\n\n\n